Kirton

Fire Retardant tested to BS 5852 ignition sources 0,1 and 5

Fabric composition: PU 38% Cotton 62%
Application: Contract direct upholstery
Moisture Vapour Permeability: 10% (BS 3546)

Cleaning Instructions

• The recommended cleaning and disinfection instructions should be followed whenever possible to avoid damage to the PU membrane which could lead to premature failure of the cover.
  
• For superficial dirt use a disposable wipe and a warm solution of neutral detergent. Do not use abrasive cleaners.
• Disinfect insitu using a 0.1% sodium hypochlorite solution (1000ppmm chlorine).
  
• Thoroughly clean off any cleaning solutions with clean water and dry fabric before re-use or storage.
  
• Do not iron.
  
• In certain circumstances, however, it might be appropriate to use an organic solvent to remove stubborn stains or surface contamination. In these instances it is suggested that the following list of commonly available solvents be tried. In some instances there could be swelling of the polyurethane and an increase in surface gloss. It is not recommended that they be used repeatedly as the long term effects are unknown.
  
• Please thoroughly clean off with water any solvent cleaners used.

• Solvents to be used with caution
  Hydrocarbon Petroleum ether, White Spirit
  Alcohols Methanol, Ethanol
  Chlorinated Dry Cleaning Fluids
  Hydrocarbons There are numerous types~
  Test on small area before using.

• Solvents to be avoided
  Ester Ethyl acetate (Nail polish removers), Amyl acetate
  Ketones Acetone, Methyl ethyl ketone
  
• For all cleaning use a clean absorbent white cloth, turning the cloth frequently to expose a clean surface. Use a dabbing action – do not rub or scrub the fabric. Always work from the outer edge of the stain towards the centre to prevent spreading the stain.

Please click here for 'The Cleaning and Care of Polyurethane Coated Fabrics from Dartex Coatings'.